珠海市柏欣机械设备有限公司,solar PV module production line;auto tabber and stringer;laser scriber;laminator;sun simulator--Semiautomatic Solar Panel Laminator Model:BXM-2212M1Y

Solar Manufacturing Equipment
	Laser Scribing Machine
	Solar Cell Tester & Sorter
	Solar Cell Tabber & Stringer
	EVA / Back Sheet Cutter
	Glass Washing Machine
	Laying & Checking Stationr
	EL Tester
	Solar Module Laminator
	Solar Module Framing Machine
	Sun Simulator
Solar Module Production Lines
Solar Systems

LED LIGHT:

	LED Panel Light
	LED Tube Light
	LED Canister Light

Position： Home >> content

Semiautomatic Solar Panel Laminator Model:BXM-2212M1Y

Product Elucidation:

Solar Module Laminator BXM-2212M1Y
Introduction
BXM-2212M1Y is a Semiautomatic solar module laminator. It can laminate all the prepared materials into a solar panel. The lamination cycle is controlled by a PLC. The operator works the program through the touch-screen to control the cycle to see the processing data. It is speicifal for the research use and samll solar solar panel production.
Benefits:
1.PLC + Touched screen control system;
2.All parameters are setup on the touch-screen;
3.The touch-screen display a diagram with all vacuum and temperature values;
4. Air pressure are adopted for the upper chamber drive system, ensuring smooth and safe operation;
5.Adopt thermal Oil heating plate system, it provides uniform plate temperature accuracy;
6.Conductive Oil heating station is separated with the machine;
7.Overheating sensor is attached for the heating plate and a disconnection detector is mounted to the heater for the heating plate;
8.Special connecting system for that the Silicon Membrane can be changed within 30 minutes.
Specification:
Production rate	3 panel/ hour. (3cycle/ hour 1panel/ cycle, 250w/panel. Smaller panel, more pieces can be laminated in one cycle)
Production	5.0~5.5MW / year. (11hours/shift, 2 shifts/ day, 350 days/year)
Laminating area size	1100×2100mm;	Max. thickness of laminate	30mm;
Working Temperature range	130-180℃;	Temperature uniformity	±1.5℃;
Vacuum degree	30-100pa;	Working cycle	18~20minutes
Main body size	2730x 1950 x1650mm	Net weight	3500kg;
Power supply	380VAC, 50 Hz,38Kw, 3 phases 5wires;